Keysight x-series Getting Started And Troubleshooting

3 Instrument Operating System
Configure Printers
Configure Printers
Printers are configured using the Microsoft Windows Control Panel. It is easily
accessed from the Windows Start menu or from under the front panel System key.
This setup process can be done using the touch screen and front-panel keys. See
"Navigating Windows Without a Mouse" on page 58.
When setting up a new printer, you may need to load the printer driver (unless you
are using a network printer that your IT department has set up to include the driver).
The manufacturer of the printer supplies the driver software and process. That may
require that you attach an external USB disk drive. An alternative is to connect the
instrument to the LAN and download the driver from the printer manufacturer’s
internet site.
Getting Started and Troubleshooting Guide 43

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)