Keysight x-series Getting Started And Troubleshooting

2 Front and Rear Panel Features
Rear-Panel Features
Rear-Panel Features
Item Description
# Name
1 EXT REF IN Input for an external frequency reference signal:
2 EXT IF OUT
Enabled by Option CRW.
Wide BW IF output for center frequency above 50 GHz.
3 CAL 1 IN Reserved for future use
4 10 MHz OUT An output of the analyzer internal 10 MHz frequency reference signal. It is
used to lock the frequency reference of other test equipment to the analyzer.
5 SNS Series
Noise Source
For use with Keysight N4000A, N4001A, N4002A Smart Noise Sources (SNS).
6 Noise Source
Drive +28 V
(Pulsed)
For use with Keysight 346A, 346B, and 346C Noise Sources.
7 TRIGGER 1 IN Allows external triggering of measurements.
8 TRIGGER 2 IN Allows external triggering of measurements.
28 Getting Started and Troubleshooting Guide

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)