4 Using Window Tools
Remote Desktop: Using the X-Series Signal Analyzers Remotely
Ending a Remote Desktop session
There are two ways to disconnect the remote computer from the instrument, ending
the session:
Step Notes
1. Click the X, then click OK. For full-screen, the X appears at the top center of the
window. For non full-screen, the X appears in a red
box at the right of the window’s title bar.
Or
2. When the remote desktop is full screen,
move the cursor to the bottom left of the
window:
–
Click Start, Disconnect.
–
Click Disconnect.
You are asked to confirm that you want to disconnect.
Getting Started and Troubleshooting Guide 65
To Next Page
Loading...
