KGuard Security Easy Link EL421 - Alarm and Motion Detection Setup

ENGLISH
Chapter 5: KGUARD Web Client
96
DVR User’s Manual
5.5.5 Seng the Alarm
Use the Alarm menu to select when to trigger the alarm and choose the alarm nocaon, such as buzzer sound,
email, or full screen nocaon.
Seng Moon Detecon
1 On the Main Menu, click Remote Seng.
2 On the le panel, click Alarm > Moon. The Moon screen appears.
3 On Channel, select the channel where you want to setup moon detecon.
4 Check the Enable box to enable moon detecon.
5 By default, the whole screen is marked for moon detecon (red block).
6 To disable moon detecon on an area, click a block and then drag the mouse to highlight the scope that you want
to unmark (gray block). Or, click Clear to unmark all areas and then select a new area to mark for moon detecon.
Area is marked for moon
detecon
Area is unmarked for moon
detecon