Need help?Do you have a question about the KGuard Security HD881 and is the answer not in the manual?
Precautions for avoiding electric shock during installation and operation.
Provides step-by-step instructions for installing a 3.5" or 2.5" SATA HDD.
Details the live view interface, menu bar, status icons, and camera toolbar.
Configure IP camera settings and image parameters.
Configure channel recording parameters and recorded video settings.
Define recording modes (Normal, Motion, PIR) and schedules for each channel.
Details PIR/Smoke detector integration and linked camera alert configurations.
Configure network types: DHCP, Static, PPPoE, and 3G.
Details network parameters like IP, subnet, gateway, DNS, and UPnP.
Configure email settings for event notifications and schedules.
Configure DDNS for remote access and FTP for snapshot uploads.
Configure motion detection parameters, sensitivity, and recording.
Configure sensor cameras (PIR, Smoke Detector) and linked channels.
Find motion within specific areas of recorded video.
Guides on selecting and backing up specific sections of video.
Configure cloud storage (Dropbox) for uploading snapshots.
Configure maintenance, event notifications, and auto firmware upgrades.
General| Video Input Channels | 8 channels |
|---|---|
| Video Output | HDMI, VGA |
| Compression Format | H.264 |
| Power Supply | DC 12V |
| Hard Drive Support | 1 SATA HDD |
| Audio Output | 1 channel |
| Motion Detection | Yes |
| Recording Resolution | 1080p |
| Storage Capacity | Up to 6TB HDD |
| Network Interface | RJ-45 Ethernet |
| Remote Viewing | Yes, via mobile app |
| USB Ports | 2 USB 2.0 |
| Playback Resolution | 1080p |
To Next Page
