Kikusui PLZ-U Series User Manual

PLZ-U Remote Control 6-25
Fig. 6-2 Trigger wait status control using INIT:CONT
INP:TRIG/OUTP:TRIG
Turns the load on/off using trigger input.
Set command: INPut[:STATe]:TRIGgered
{OFF|ON|0|1}
OUTPut[:STATe]:TRIGgered
{OFF|ON|0|1}
• Program data
Value OFF(0) Turn the load off
ON(1) Turn the load on
INIT:CONT?
Update the setting
Trigger wait
Idle
Power on
ABORt, *RST, DCL
XXX: TRIG command
INIT[:IMM] or INIT: CONT ON
Trigger
(GET, *TRG, or hardware trigger)
ON
OFF

Kikusui PLZ-U Series Specifications

General

Brand	Kikusui
Model	PLZ-U Series
Category	Control Unit
Language	English