Kikusui PLZ-U Series User Manual

2-2 Installation and Preparation PLZ-U
2.1 Checking the Package Contents
When you receive the product, check that all accessories indicated below are
included and that the accessories have not been damaged during transportation.
If any of the accessories are damaged or missing, contact your Kikusui agent or dis-
tributor.
• It is recommended that all packing materials be saved, in case the product needs
to be transported at a later date.
2.1.1 Frame
Fig.2-1 Accessories (frame)
NOTE
Power cord (1 pc.)
Blank panel (rear)
Blank panel (front)
Operation manual (this manual, 1 pc.)
[P1-000-406]
[P1-000-405]
FRAME CONT protection dummy plug (2 pcs.)
[Attached to the product.]
[Attached to the product.]* [Attached to the product.]*
[84-49-0071]
PLZ-30F (2 pcs. maximum)
PLZ-50F (4 pcs. maximum)
PLZ-30F (2 pcs. maximum)
PLZ-50F (4 pcs. maximum)
* In products that have load units installed, blank panels are installed in the empty slots.
In products that contain the frame alone, the maximum number of blank panels are installed.
The power cord that is provided varies depending on the
destination for the product at the factory-shipment.
[85-AA-0003] [85-AA-0005]
Rating: 125 Vac/10 A
Plug: NEMA5-15
Rating: 250 Vac/10 A
Plug: CEE7/7
[85-10-0790]
Rateing: 250 Vac/10 A
Plug: GB1002
or or

Kikusui PLZ-U Series Specifications

General

Brand	Kikusui
Model	PLZ-U Series
Category	Control Unit
Language	English