PLZ-U Installation and Preparation 2-3
2.1.2 Load Unit
The following accessories are included with each load unit.
Fig. 2-2 Accessories (load unit)
Rear load input terminal cover Set of screws for the load input terminal
(2 pcs. each)
Rear sensing terminal screws (M3-6: 2 pcs.)
[M1-100-006]
[M5-101-006]
[M4-100-006]
[Q1-500-077]
[M3-112-012]
Load unit attachment screws (M3-10, 2 pcs.)
[Attached to the load unit.]
[M3-112-014]
[M3-112-026]
[Attached to the load unit.]