PLZ-U Names and Functions of Parts 3-7
STORE
Displays the setup memory number in which the current panel settings are to be
saved. If you press this key while holding down the SHIFT key (SHIFT +
RECALL), this key and the STORE indicator illuminate and the memory number is
displayed. Set the memory number using the rotary knob.
[18-2] ENTER key
This key is used to enter the memory number when saving or recalling a setup mem-
ory.
[18-3] LOCAL/KEY LOCK key
LOCAL
Switches to panel control (local control) when the PLZ-U is being controlled
remotely.
KEY LOCK
Each time you press this key while holding down the SHIFT key (SHIFT +
LOCAL), the key lock is activated or released. When releasing the lock, hold the
key down until a beep is heard.
[18-4] CLEAR/CONFIG key
CLEAR
Clears the alarm when an alarm is activated. However, the alarm can be cleared only
when the cause of the alarm has been cleared.
CONFIG
Press this key while holding down the SHIFT key (SHIFT + CLEAR) to enter con-
figuration mode.
To Next Page
Loading...
Need help?
General
