Kintech Engineering ORBIT 360 - Sensor Model; Fig. 49. Sensor Model

KINTECH ENGINEERING
ORBIT 360 | USER GUIDE
93
7.5.7 SENSOR MODEL
This screen allows the installer to configure the type of sensor to be connected to a
specific channel of the Orbit 360 data logger.
Fig. 49. Sensor model
Each of the available channels can be individually and accordingly configured as shown
in the following lists. These lists include most of the sensors known in the wind and solar
energy sector. However, if you are planning to connect sensors to the data logger that
are not listed in our software or on the display of the logger, please contact out technical
support department for validation of the sensor you are trying to connect.