(1) Bulb
5. Replace the bulb with a new bulb
and install it in the reverse order of
removal.
If using a bulb other than the
damaged and the tractor can
Make sure to use bulbs with
•
•
WARNING
Make sure to use a KIOTI genu-
ine bulb. Using a non-recom-
-
ily be fogged due to rain or
car wash. This is because of
-
tween the inside and outside
•
•
CAUTION
WORK LAMP
(1) Lens mounting bolt (M6: 3 EA)
(2) Work Lamp (3) Mounting nut
1. Unscrew the mounting nut of the
work lamp to lower the lamp to-
ward the front.
2. Unscrew the lens mounting bolts (3
EA) to remove the lens.
M56O755A
-
rial or moisture is on the bulb
be shortened and the bulb can
be blown. Make sure to clean
the bulb with soft rag.
•
IMPORTANT
M56O737A
To Next Page
Loading...
