CK2810 / CK3010H
7
-
36
(1) Bulb
M56O756A
TURN SIGNAL LAMP
1. Unscrew the turn signal lamp lens
mounting bolt to remove the lens.
(1) Turn signal lamp lens
M56O757A
3. With the bulb pressed in, turn it
counterclockwise to remove it. Re-
place it with a new one.
Do not touch the illuminating
The bulb life can be shortened
-
broken. Clean it with soft cloth.
The halogen bulb contains
-
bulb if it is scratched or was
be careful not to damage it.
-
Install a new bulb with the
the installed bulb.
•
•
•
•
•
CAUTION
Do not touch the bulb if it is
still illuminated or right after
it is turned off. You can be
burned by the hot bulb.
For some bulbs which require
-
Dealer.
•
•
CAUTION
To Next Page
Loading...
