SERVICE MANUAL Removals and Installations
23JUL01
SM5766-1
Page
11 of 96
Removal for the MOTOR
Warning
Dangerous Voltage
1 Disconnect the main power.
2 Do the removal for the LOWER HOUSING ASSEMBLY.
3 Lift the TRANSFORMER up.
4 Lift and remove the POWER MODULE.
5 Cut the 2 WIRE TIES on the SMALL BOARD between the MOTOR and MECHANISM
ASSEMBLY.
6 Disconnect the 2 violet wires from the CYCLE SOLENOID on the SMALL BOARD.
7 Pull the SMALL BOARD up.
8 Disconnect all wires on the MOTOR.
To Next Page
Loading...
