Kodak Ektalite 500 - CLAMP PAD ASSEMBLY - 1500 and 2000 PROJECTORS Only

SERVICE MANUAL Adjustments
23JUL01
SM5766-1
Page
55 of 96
CLAMP PAD ASSEMBLY - 1500 and 2000 PROJECTORS Only
Warning
Dangerous Voltage
1 Disconnect the main power.
2 Do the removal for the LOWER
HOUSING ASSEMBLY.
Important
It is necessary to use a FAN COVER TOOL.
3 Install the FAN COVER TOOL over the
FAN area and the LAMP MODULE.
4 Connect the REMOTE CONTROL
ASSEMBLY to the REMOTE
RECEPTACLE.
A091_4041GA
A091_4041GCA
SCREW
NUT
CLAMP PAD
ASSEMBLY