SERVICE MANUAL Adjustments
23JUL01
SM5766-1
Page
43 of 96
SLIDE LIFT LEVER MANUAL
Warning
Dangerous Voltage
1 Disconnect the main power.
2 Do the removal for the MECHANISM ASSEMBLY.
3 Place the MECHANISM ASSEMBLY on the MECHANISM RUNNING FIXTURE.
4 Press and hold the SELECT LEVER down to move the SLIDE LIFT LEVER to the
highest position.
5 Measure the height of the SLIDE LIFT LEVER. Use SLIDE LIFT LEVER GAUGE TL-
3001. The SLIDE LIFT LEVER should make contact with the low surface of the SLIDE
LIFT LEVER GAUGE TL-3001; the SLIDE LIFT LEVER should not make contact with the
high surface of the SLIDE LIFT LEVER GAUGE TL-3001.
6 Bend the SLIDE LIFT LEVER until the adjustment is correct.
A091_0016BA
TL-3001
LEVER GUAGE
SLIDE LIFT
SELECT
A091_0016BCA
(not shown)
LEVER
SLIDE LIFT
LEVER
To Next Page
Loading...
