Kodak Ektalite 500 - Installation for the AUTO-FOCUS BRACKET ASSEMBLY - 1500 and 2000 PROJECTORS Only; Removal for the CAM STACK ASSEMBLY and CYCLE LEVER ASSEMBLY

SERVICE MANUAL Removals and Installations
23JUL01
SM5766-1
Page
24 of 96
Installation for the AUTO-FOCUS BRACKET ASSEMBLY - 1500 and
2000 PROJECTORS Only
1 Do the removal for the AUTO-FOCUS BRACKET ASSEMBLY in reverse order.
Removal for the CAM STACK ASSEMBLY and CYCLE LEVER ASSEMBLY
Warning
Dangerous Voltage
1 Disconnect the main power.
2 Do the removal for the MECHANISM ASSEMBLY.
3 Remove the INDEXER LEVER ASSEMBLY from the TOP PLATE of the MECHANISM
ASSEMBLY.
4 Remove the Torx SCREW from the WORM PULLEY ASSEMBLY.
5 Remove the WORM PULLEY ASSEMBLY.
A091_4023BA
SOLENOID
CYCLE
SCREW
ASSEMBLY
BRACKET
FOCUS
AUTO
SCREW (2)
SCREW
A091_4023BCA
PULLEY
WORM