SERVICE MANUAL Removals and Installations
23JUL01
SM5766-1
Page
32 of 96
Removal for the LENS MOUNT ASSEMBLY - 1500 and
2000 PROJECTORS Only
Warning
Dangerous Voltage
1 Disconnect the main power.
2 Do the removal for the LOWER
HOUSING ASSEMBLY.
3 Disconnect the 3 CONNECTORS on
the MAIN BOARD. It is not necessary to
disconnect the CONNECTOR next to
the LOWER LIGHT BAFFLE
ASSEMBLY.
4 Lift the MAIN BOARD up.
5 Remove the FOCUS KNOB.
6 Remove the short, gray wire connected
to the AUTO-FOCUS DEFEAT
SWITCH.
Important
It is necessary to push the AUTO-FOCUS
BRACKET backward and forward to allow
access to the SCREWS on the LENS
MOUNT ASSEMBLY.
7 Remove the 3 SCREWS from the LENS
MOUNT ASSEMBLY.
8 Lift and remove the LENS MOUNT
ASSEMBLY.
A091_4024GA
A091_4024GCA
LENS
MOUNT
ASSEMBLY
SCREW (3)
To Next Page
Loading...
