Kodak Ektalite 500 - Removal for the Style 2 LAMP SOCKET TERMINAL ASSEMBLY

SERVICE MANUAL Removals and Installations
23JUL01
SM5766-1
Page
30 of 96
Removal for the Style 2 LAMP SOCKET TERMINAL ASSEMBLY
Warning
Dangerous Voltage
1 Disconnect the main power.
Important
The EXTRA BRIGHT LAMP MODULE does
not have a HEAT ABSORBING GLASS and
has a LABEL on the LAMP DOOR.
2 Remove the LAMP MODULE.
3 Remove the PROJECTION LAMP from
the LAMP MODULE.
4 Remove the SCREW from the LAMP
DOOR PLATE ASSEMBLY.
A091_0018CA
LAMP DOOR
LAMP
LAMP
HEAT ABSORBING
PLATE ASSEMBLY
PROJECTOR
EJECTOR
ASSEMBLY
TERMINAL
LAMP SOCKET
TAB (2)
GLASS
SCREW
A091_0018CCA
LENS
CONDENSER