Kodak Ektalite 500 - Installation for the CYCLE SOLENOID ASSEMBLY

SERVICE MANUAL Removals and Installations
23JUL01
SM5766-1
Page
20 of 96
11 Remove the 2 Hex SCREWS -
1/4 in. from the 2 CYCLE SOLENOID GROMMETS.
12 Pull the CYCLE SOLENOID ASSEMBLY up and out.
13 If necessary, remove the CYCLE SOLENOID PLUNGER ASSEMBLY.
Installation for the CYCLE SOLENOID ASSEMBLY
Important
Do the adjustment for the CYCLE SOLENOID ASSEMBLY. See the Adjustments section.
1 Do the removal for the CYCLE SOLENOID ASSEMBLY in reverse order.