Kodak Ektalite 500 - Installation for the FAN SHAFT ASSEMBLY

SERVICE MANUAL Removals and Installations
23JUL01
SM5766-1
Page
10 of 96
Installation for the FAN SHAFT ASSEMBLY
Important
When installing the FAN and MECHANISM BELTS, install the MECHANISM BELT on the
small MOTOR PULLEY, and the FAN BELT on the large MOTOR PULLEY.
1 Do the removal procedure for the FAN BELT and SHAFT in reverse order.
A091_4015BA
A091_4015BCA
MECHANISM BELT
FAN BELT