SERVICE MANUAL Removals and Installations
23JUL01
SM5766-1
Page
9 of 96
Caution
Move the MOTOR to allow access to the parts; wires are still connected to the MOTOR. Do
not cause damage to the MOTOR wires.
17 Remove the RETAINER CLIP from the FAN SHAFT.
18 Pull the FAN up and off the FAN SHAFT to allow access to the FAN BELT.
19 Remove the FAN BELT.
20 Remove the 3 Torx SCREWS from the FAN SHAFT ASSEMBLY.
21 Lift and remove the FAN SHAFT ASSEMBLY.
A091_4012HA
MECHANISM BELT
MOTOR
FAN BELT
SCREW
BLOWER
SCREW (3)
ASSEMBLY
FAN PLATE
A091_4012HCA
ASSEMBLY
RETAINER CLIP
FAN
SCREW (2)
To Next Page
Loading...
