SERVICE MANUAL Removals and Installations
23JUL01
SM5766-1
Page
8 of 96
12 Remove the 2 long Torx SCREWS from the BLOWER COVER ASSEMBLY.
13 Lift the BLOWER COVER ASSEMBLY up.
14 Remove the 3 Torx SCREWS - 1/4 in. from the MOTOR.
15 Lift the MOTOR until you observe the FAN BELT and MECHANISM BELT.
16 Remove the FAN BELT and MECHANISM BELT off the MOTOR PULLEY. Use SPRING
HOOK TL-1165.
A091_4011HA
SCREW (not shown)
GRILLE
WIRE TIE
LOWER LIGHT
BLOWER COVER
(not shown)
WIRE TIE (2)
ASSEMBLY
A091_4011HCA
SCREW
BAFFLE TAB
POWER MODULE
TRANSFORMER
To Next Page
Loading...
