SERVICE MANUAL Removals and Installations
23JUL01
SM5766-1
Page
28 of 96
19 Remove the 2 SCREWS from the
CYCLE SOLENOID.
20 Remove the CYCLE SOLENOID.
21 Slide the PLUNGER and PLUNGER
SPRING off the CYCLE LEVER.
22 Remove the HALF CYCLE SPRING
between the CYCLE LEVER
ASSEMBLY and the HALF CYCLE
LEVER.
23 Disconnect the INDEX LEVER SPRING
from the MECHANISM ASSEMBLY.
24 Push the INDEX LEVER back.
25 Remove the 2 E-RINGS:
• 1 on the CYCLE LEVER ASSEMBLY
• 1 on the HALF CYCLE LEVER
Caution
Keep both the CYCLE LEVER ASSEMBLY
and the HALF CYCLE LEVER together and
observe the orientation of both LEVERS.
26 Slide both the CYCLE LEVER and
HALF CYCLE LEVER off the SHAFT.
A091_0009CA
SCREW (2)
CYCLE
SOLENOID
and SPRING
INDEX LEVER
(not shown)
PLUNGER
LEVER SPRING
HALF-CYCLE
SPRING
PLUNGER
LEVER
CYCLE
LEVER
HALF-CYCLE
A091_0009CCA
E-RING (2)
To Next Page
Loading...
