Kodak Ektalite 500 - Page 52

SERVICE MANUAL Adjustments
23JUL01
SM5766-1
Page
52 of 96
9 Heat the 2 POSTS on the PHOTOCELL HOUSING to allow the POSTS to bend enough
to pull the PHOTOCELL BOARD up and off the PHOTOCELL HOUSING. Use a
SOLDERING IRON.
10 Remove the 2 Wratten FILTERS and the PHOTOCELL MASK.
11 Install the FAN CAP 232729 in the
PHOTOCELL HOUSING.
A091_4033GA
light image
hole
FAN CAP
A091_4033GCA
FAN CAP