Konica Minolta CL-70F - Page 148

135
7. Meter Settings [Setting] Screen
2.
Set the deviation value.
(
¨
P19)
If the entered value is within the setting range, the [OK] button is displayed.
If it is outside the set range, re-enetred a value.
3.
Touch the [OK] button.
The number is memorized, and the display returns to the page 2 of the Preset
Editing (2°)/(10°) screen.
To return to the page  of the reset diting )0) screen without conrming, touch
the [Cancel] button.
The ⊿ uv (Deviation) is edited.
NOTE
The edited preset data will be displayed on the Preset Information screen.
Preset Editing Screen
(Page 2)
⊿
uv screen
(if within the set range)
⊿
uv screen
(if outside the set range)
Input
number
Out of the
range
[Cancel] Button [Cancel] Button[OK] Button