Konica Minolta CL-70F - Page 150

137
7. Meter Settings [Setting] Screen
2.
Set tristimulus value Y.
(
¨
P19)
If the entered value is within the setting range, the [OK] button is displayed.
If it is outside the setting range, re-enter a value.
3.
Touch the [OK] button.
The number is conrmed and the display returns to the page 2 of the Preset
Editing (2°)/(10°) screen.
To return to page  of the reset diting )0) screen without conrming, touch the
[Cancel] button.
The tristimulus value Y (illuminance (lx)) is edited.
NOTE
●
The edited preset data will be displayed on the Preset Information screen.
●
Setting range of tristimulus value Y is 1.0000 to 200,000, although the meter’s
measuring range of illuminance l) is from  to 00,000l.
Preset Editing Screen
(Page 2)
Y Screen
(within the setting range)
[Cancel] Button[OK] Button
Y Screen
(outside the setting range)
Input
number
Outside the
range
[Cancel] Button