Konica Minolta CL-70F - Page 152

139
7. Meter Settings [Setting] Screen
2.
S et the peak wavelength p within the range from 38 to 78 nm.
(
¨
P19)
If the entered value is within the setting range, the [OK] button is displayed.
If it is outside the setting range, re-enter a value.
3.
Touch the [OK] button.
The number is memorized, and the display returns to the page 3 of the Preset
Editing (2°)/(10°) screen.
To return to the page  of the reset diting )0) screen without conrming, touch
the [Cancel] button.
The p (Peak wavelength) is edited.
NOTE
The edited preset data will be displayed on the Preset Information screen.
p Screen
(within the setting range)
Preset Editing Screen
(Page 3)
[Cancel] Button[OK] Button
p Screen
(outside the setting range)
Input
number
Outside the
range
[Cancel] Button