Konica Minolta CL-70F - Page 172

159
8. Hardware Setting Screen
2.
Touch the [Yes] button.
The factory setting conrmation message "All measurements will be lost when
you perform this operation. Are you sure?" will be displayed.
Conrm again.
To return to the Hardware Setting screen without resetting to factory default settings,
touch the [No] button.
3.
Touch the [Yes] button.
NOTICE
When the message "Deleting Memory. Please wait." or the progress bar
is displayed, do not turn the power off. Otherwise, the meter may be
damaged.
All measurement values are deleted, and the display returns to the Hardware
Setting screen.
Factory Setting Conrmation
Screen
Hardware Setting ScreenFactory Setting (Deleting) Screen
[No] Button
[Yes] Button
[Close] Button