15
3. Basic Operation Methods
Item List
No. Part ame Description
1
Status Bar
Displays the setting contents. (
¨
P16)
2
[Measuring Mode] Icon
Displays the measuring mode. (
¨
P22)
Switches to the Measuring Mode Selection screen.
3
[Display Mode] Icon
Displays the display mode. (
¨
P28) Switches to the
Display Mode Selection screen.
4 ~ 8
[Display Item] Indication
Switches to the Item Selection screen. (
¨
P27)
9
[Tool Box] Icon
Switches to the Tool Box screen. (
¨
P79)
10
[Delta] Icon
(in Ambient Light Mode
only)
Displays when Monitor Function can be
performed.
When there is no reference preset value,
the icon is disabled.
When Monitor Function cannot be
performed, the ( ) icon is not displayed.
When is touched, Monitor Function is
activated. When displaying this delta icon or holding the
Measuring Button
5
, the value differences of the preset
value and the current reading being measured will be
displayed. (The preset value is a value that has been
preset.)
When is touched, the icon returns to
and the values measured last are displayed.
Monitor Function is cancelled when the power is turned
OFF.
Note: When the Monitor Function icon is displayed, the
Memory Button
7
is disabled.
11
[Exposure Time]
Indication
Switches to the Exposure Time Selection screen.
(
¨
P24)
NOTE
When values are outside the display or measurement range, [Under] or [Over] is displayed.
When the color temperature is outside the calculation range, [---] is displayed.
Under: Displayed if value is lower than measurement range (too dark).
Over: Displayed if value is higher than measurement range (too bright).
---: When the color temperature is outside the calculation range, [---] is displayed.
To Next Page
Loading...
