86
6. Measurement Tool [Tool Box] Screen
4.
Touch the [Close] button.
Returns to the Measurement screen.
The memory title is entered.
NOTICE
The memory title needs to be entered before memorizing.
The memory title can be edited and renamed at any time afterward using the
Memory Management function. (
¨
P93)
5.
Measure light.
Press Measuring Button
5
to take a measurement.
The Light Selection Ring
2
should be set to L ( )
when taking ambient light measurements.
When measuring ash units, select Range L ( )
or Range H ( ) depending on the brightness of
the ash.
¨
P77,
¨
P78)
Light Selection Ring
2
Measuring Button
5
Measurement screen
Measurement
Tool Box Screen
[Close] Button
To Next Page
Loading...
