Using the Utility Mode
7
Konica 7115/7118 7-23
Total Counter Display by Account Procedure (A-5)
1
Call the Administrator Mode to the Display.
❍
Calling the Administrator Mode to the Display (p.7-16)
2
Making sure that “Ad-” appears on the Display, enter “1”
on the KEYPAD.
3
Press the [START] key.
4
Making sure that “A--” appears on the Display, enter “5”
on the KEYPAD.
5
Press the [START] key.
6
Press [ ] or [ ] key to select the account number for
which you want to check the Total Counter value.
7
Press the [START] key.
8
The Display will show the Total Counter value.
E.g.: If the Total Counter value is 1,234, then the Display
will show something like that shown on the right.
?
Do you know how to reset the Total Counter value?
➜
Press the [CLEAR] key.
Konica7115_7118.book Page 23 Friday, October 19, 2001 12:02 PM
To Next Page
Loading...
