6
Advanced Copying
6-4 Konica 7115/7118
?
Do you know how to set the erase width for each erase function?
➜
The frame erase width can be set in the range between 1/4 and 3/4, in 1-mm (1/16) in-
crements. The default value is 1/2.
➜
Only 1/2 is available for the center erase width.
➜
To change the setting for the frame erase width, use “Erase Setting” in the User’s Choice
mode. (p.7-8)
4
Make any other necessary settings.
5
Enter the number of copies to be made on the KEYPAD and then press the [START] key.
Konica7115_7118.book Page 4 Friday, October 19, 2001 12:02 PM
To Next Page
Loading...
