Korg M3 User Manual

Using KARMA
184
Synchronization via MIDI realtime com-
mands
Enable Start/Stop Out in Prog/Combi
You can set up M3 so that starting and stopping
KARMA in Program and Combination modes will also
control start and stop on external MIDI devices, such
as sequencers and drum/groove machines (such as the
KORG Electribe series).
To do so:
1. Go to the Global MIDI page.
2. Under MIDI Routing Setup, turn on “Enable Start/
Stop Out in Prog/Combi.”
• In Program and Combination modes, playing a
note-on from the keyboard or pads to trigger the
GE selected for a KARMA module will also cause
the MIDI system realtime message “Start” to be
sent at the trigger timing.
• After the Start message has been sent, turning off
KARMA ON/OFF will send the MIDI system
realtime “Stop” command.

Korg M3 Specifications

General

Synthesis Type	EDS (Enhanced Definition Synthesis)
Sound Engine	EDS (Enhanced Definition Synthesis)
MIDI	In, Out, Thru
Keyboard	61-key, velocity-sensitive, aftertouch
Sequencer	16-track MIDI sequencer
Sampling	Open Sampling System
Display	TouchView graphical user interface with 320x240 color TFT LCD
Arpeggiator	2 polyphonic arpeggiators
Controllers	Joystick, Ribbon Controller
Outputs	L/MONO, R, Individual 1-4, Headphones
USB	Yes, USB MIDI
Storage	SD card slot
Combinations	1, 792 user combinations
Polyphony	120 voices (max)
Effects	5 Insert effects, 2 Master effects, 1 Total effect