Quick Start
Introduction
SetupProgram
Combination
Sequencer
SamplingGlobalMediaEffectKARMA
Drum Track
Other
Appendices
201
Appendices
Restoring the factory settings
Loading the preloaded data
The original preload data is backed up in the M3 and
can restore any or all of the Programs, Combinations,
Drum Kits, and Global settings to their original factory
settings. The original demo songs can also be re-loaded
at any time using this same method.
This is done by re-loading the preload data stored
within the M3.
Never turn off the power while the data is being
loaded.
Before you load the preload data, go to the Global
mode P0: Basic Setup– System Preference page,
and uncheck the “Memory Protect” settings for the
data that you want to load. If you execute this
operation with these settings checked, and the
data will not be loaded.
Loading the preloaded data will overwrite the
data in internal memory. If you want to keep the
data that is currently in internal memory, use
“Save All” or “Save PCG” to save it to external
media before you continue.
1. Access the Global mode P0: Basic Setup– Basic
page.
Press the MODE GLOBAL switch to enter Global
mode.
If the Global P0: Basic Setup– Basic page is not
shown, press the EXIT switch.
2. Press the menu button, and choose “Load Preload/
Demo Data.”
A dialog box will appear.
3. In the “Kind” field, select All Preload PCG.
In addition to All Preload PCG, you can also select :
All (Preload PCG and Demo Songs)
All Demo Songs
Program
Combination
Drumkit
Global Setting
Note: Program, Combination and Drumkit can load all,
a single bank, or an individual item
4. Press the OK button to execute the load operation.
If you decide not to execute, press the Cancel
button.
When you press the OK button, a dialog box will
ask you for confirmation. Press the OK button to
execute loading.
Note: While a dialog box is displayed, the ENTER
switch will perform the same function as the OK
button.
About the data loaded by All Preload PCG
When you execute All Preload PCG, the following data
will be loaded. When you execute All (Preload PCG
and Demo Song), the Demo Song data will be loaded
in addition to the data of All Preload PCG.
If the EXB-RADIAS is installed, programs will be
loaded into bank I–F.
If the EXB-RADIAS is not installed
• Program:
Bank I–A ... I–E, U–A ...U–D (000...063), U-E
• Combination: Bank I–A ... I–C, U–E (000...031)
• Drum Kit: 000(INT)...031(INT)
• Global Setting
• Demo Song: S000–S005, S008...S015
Only when executing All (Preload PCG and Demo
Song)
Note: Demo song data will be erased when the power is
turned off.
If the EXB-RADIAS is installed
In addition to the above data, the following items will
also be loaded.
• Program: Bank I–F
• Formant Motion 1–16
For details, please see “EXB-RADIAS for M3 Manual”
(PDF).
To Next Page
Loading...
Need help?
General
