Korg M3 - Controller Settings for the Program

Playing and editing Programs
46
Controller settings for the
program
The Prog P0: Play– Main page lets you view the
following information.
SW1, SW2: Indicates the functions controlled by the
SW1/SW2 switches of the KYBD-61/73/88.
C.S.: Indicates the currently selected control assign
setting. Control via the control surface is active in all
pages.
FILTER 1, 2: Indicates the filter type setting for filter 1
and 2.
AMP EG 1, 2: Indicates the EG setting for amp 1 and 2.
EQ (Low, Mid[Hz], Mid, High): Indicates the 3-band
EQ settings. You can use the VALUE controller to edit
the values.
[SW1], [SW2]
Assign
Control
Surface
EQ
Filter Amp EG