Overview Sequencer mode structure
79
Quick Start
Introduction
SetupProgram
Combination
Sequencer
SamplingGlobalMediaEffectKARMA
Drum Track
Other
Appendices
Sequencer mode page structure
For details on how to access each mode and page,
please see “Basic operations” on page 22.
The MIDI transmit/receive settings for each track are
made in MIDI Channel (P3: Track Param– MIDI T01–
08/T09–16 page).
Sampling or resampling can be performed in
Sequencer mode. For details, please see “Sampling in
Program, Combination, and Sequencer modes” on
page 122.
Since you can apply the M3’s internal effects to the
external audio inputs, a wide range of possibilities are
available.
For details, please see “Using effects in Combinations
and Songs” on page 157.
Page Main content
PLAY
P0–1: Play/REC
Song selection, playback, and recording.
Program selection for each track.
Pan and volume settings etc. for each
track.
Track playback loop settings.
Audio input settings and resampling
settings.
Recording method selection.
P0–2: Play/REC
Control
Simple KARMA editing.
Editing from the control surface.
EDIT
P1: DT/XY/Ctrls
Drum Track settings.
X–Y control settings.
SW1, 2, and slider function settings.
Pad note and velocity settings.
P2: EQ/Option
EQ settings for each track.
Settings for the EXB-RADIAS option.
P3: Track Param
Various parameter settings for each track
(MIDI channel, OSC selection, Pitch
setting, etc.)
P4: Zone/Delay
Key split and layer settings.
(Key zone and velocity zone)
Time delay from note-on to beginning of
sound.
P5–1: MIDI Filter1 MIDI transmit/receive filter 1 settings.
P5–2: MIDI Filter2 MIDI transmit/receive filter 2 settings.
P6: Track Edit
Step recording.
Event recording.
Copy, delete, and other track editing.
KARMA
P7–1: KARMA1
GE Setup
Overall KARMA settings.
P7–2: KARMA2
Module
Settings for each KARMA module.
P7–3: KARMA3
GE RTP
KARMA GE realtime parameter settings.
P7–4: KARMA4
Perf
KARMA performance parameter settings.
EFFECT
P8–1: IFX–
Routing1
Oscillator output bus and master effect
send level settings.
Insert effect routing, selection, and
settings.
P8–2: IFX–
Routing2
Bus settings for oscillator output.
Common FX LFO 1, 2 settings.
P9: MFX/TFX
Master effect routing, selection, and
settings.
Total effect selection and settings.
PAT TERN&CUE
P10: Pattern/
RPPR
Pattern recording and editing.
RPPR settings.
Converting a pattern to a Drum Track
pattern.
P11: Cue List
Cue list settings.
Consecutive playback of multiple songs.
Converting to a song.
To Next Page
Loading...
Need help?
General
