12
Panel description and functions
1. Front panel
4
9
17 18
78
10
11
1.
VOLUME knob
is adjusts the volume of the AUDIO OUTPUT jacks (L/MONO, R) and headphone jack.
2.
TAP TEMPO button
During playback, you can enter a tempo manually by lightly tapping this button a few times at
the desired tempo (Tap Tempo).
3.
RATIO OP 1–6 knobs
ese knobs change the pitch of each Operator. Operate the knobs while holding down the SHIFT
button to change the Operator modes. See “Editing with the OPERATOR MIXER”, p.23.
4.
LEVEL OP 1–6 sliders
ese sliders change the output level of each Operator. Operate the sliders while holding down
the SHIFT button to change the oscillator waveforms. See “Editing with the OPERATOR
MIXER”, p.23.
5.
Display
is shows various information such as program data and parameter values.
6.
PROGRAM knob
Selects the program. See “Selecting a program to use when playing”, p.19.
7.
PAGE < and > buttons
Use the < and > buttons to switch between edit pages.
ese are enabled when the page guide is shown in the
display.
(the second page is selec
Page guide