Korg opsix - Playing the opsix

19
2. Playing the opsix
Selecting a program to use when playing
Selected
program name
1.
Turn the PROGRAM knob to select a program.
2.
Play the keyboard to check the sound.
Adjust the volume level using the VOLUME knob.
3.
To conrm that this is the program you want to select, press the YES button.
To cancel the selection and return to the previous program, press the NO button.
Tip:
Press the PAGE < and > buttons shown in the program list to switch sounds one at a time.
4.
To change the tonal range of the keyboard, press the OCTAVE button. You can change the octave
within a range of ±2 octaves.
Octave +2
Octave +1
Octave ±0
Octave −1
Octave −2
Numbers in parentheses ( ) are MIDI note numbers.
5.
Use the PITCH wheel to change the pitch. e MOD wheel modies whatever parameter is has
been assigned to. It is oen used to change the cuto frequency or vibrato depth. You can also
change which parameters are controlled by the MOD wheel.