Korg opsix - PROG MISC (Program Misc); USER ALG (User Algorithm)

67
PROG MISC (Program Misc)
LEVEL (Program Level)
Sets the volume for the entire program. e result will be applied to the eect output.
ALG FB (Algorithm FB)
Aside from the user algorithms, feedback algorithms are connected like a feedback loop that sends
signals upwards through the algorithm. (ALGO X, X, .. X) is parameter sets the signal level that
ows through the feedback loop. e feedback loop is picked up following the LEVEL (Program
Level) of the Operator, which lets you use the changes in LEVEL (Program Level) to aect the
feedback as well, creating complex eects.
PHASE (OSC Phase)
is sets this oscillator’s phase for each note-on as follows.
SYNC:
Sets the oscillator phase to “0”.
FREE:
Sets the value for all oscillators to the same random value.
RANDOM:
Sets and changes the value for each oscillator’s phase randomly.
LOFI (LoFi)
When this is turned on, the oscillator waveform and level control signals are tuned more roughly,
creating a slightly noisy sound that is like an older digital synth.
USER ALG (User Algorithm)
Select this page and press the YES button to edit the user algorithms. Go to a dierent page to nish
editing.