59
SEQ NOTE (Sequencer Note)
LANE
Up to six notes can be used in one step on the opsix. Select the lane where the note will go, from 1 to
6.
NOTE (Lane Note)
is sets the note number for the selected step and lane.
START (Start Offset)
Sets the timing used to trigger a step, as a percentage of the step length.
Increasing the RESO (Resolution) lets you easily create the timings oen used in hip-hop and
neo-soul music, as well as sounds like strumming and ams.
ACTIVE
Sets whether this step is triggered or not.
VEL (Velocity)
Sets the velocity of the selected step and lane.
GATE (Gate Time)
Sets the note length of the selected step and lane. When you want to make a note sound for longer
than the step length, use a tie to connect the note to the next step.
To Next Page
Loading...
