Korg opsix User Manual

26
SEQ: Used for setting how the sequencer operates, and for making detailed edits to the sequence
data.
VOICE: Set whether a sound plays in mono, poly or unison mode.
V.PATCH: Specify the destination and depth of the eect produced by the LFO, EG and other
modulation sources.
MISC: Used for changing other program parameters. You can copy Operators on the OP UTIL
page.
GLOBAL: Used for conguring the overall instrument. e settings you make in this mode are
not saved to a program, but instead apply to all programs. Any changes you make will be saved
automatically.
Tip:
For details on each parameter, see the “Parameter Guide”, and for more information on the
eect parameters, see “Eect Parameter List” (→ p.84).
Saving a program
Save any programs to the opsix that you have edited.
Any edits you make will be lost if you turn o the power of the opsix or select a dierent program
before saving the data.
1.
Press the WRITE button.
e opsix will enter program save standby mode, and the YES and NO buttons will blink.
2.
Change the program name as necessary.
PROGRAM knob: Changes the character at the cursor position.
SHIFT button: Changes the type of character to input.
PAGE < and > buttons: Moves the cursor. Hold down the SHIFT button while pressing the PAGE
< button to delete the character at the cursor position. Hold down the SHIFT button while
pressing the PAGE > button to insert a blank space at the cursor position.
DATA ENTRY A–F knobs: Turning these knobs le or right is the same as pressing the PAGE <
and > buttons in succession.
3.
Press the YES button to conrm the program name.

Korg opsix Specifications

General

Equalizer	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Chorus, Flanger/Digital Signal Processing (DSP), Phaser, Reverberation
Sound effects quantity	500
Keyboard number of keys	37
Maximum polyphony (notes)	32
Headphone outputs	1
DC input voltage	12 V
Power source type	AC

Weight and Dimensions

Depth	338 mm
Width	565 mm
Height	90 mm
Weight	2900 g