Korg opsix User Manual

44
OPERATORS: PITCH
PITCH: OP1...6 (Operator Pitch)
FREQ (Frequency Mode)
Use this to select how the oscillator pitch will be set.
FIXED:
With this setting, the oscillator pitch will stay at the same frequency regardless of the
note number.
RATIO:
With this setting, the frequency of the note number will be multiplied with the ratios set
in COARSE (Coarse Ratio) and FINE (Fine Ratio) to set the oscillator pitch.
TRANS (Transpose)
Shis the oscillator pitch in semitones over a range of ±1 octave. is setting is enabled only when
FREQ (Frequency Mode) is set to “RATIO”.
When “FREQ” is FIXED
x100, x1, x0.01
is sets the oscillator frequency over a range of 0.01 to 9999.99 Hz.
When “FREQ” is RATIO
COARSE (Coarse Ratio)
is is used for coarse adjustments of the oscillator pitch. When this setting is “1”, the frequency is
the same as the note number. When this setting is less than “1”, the pitch will shi down in units of
octaves. When this setting is more than “1”, the pitch will shi up in integer units according to the
frequency of the note number.

Korg opsix Specifications

General

Equalizer	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Chorus, Flanger/Digital Signal Processing (DSP), Phaser, Reverberation
Sound effects quantity	500
Keyboard number of keys	37
Maximum polyphony (notes)	32
Headphone outputs	1
DC input voltage	12 V
Power source type	AC

Weight and Dimensions

Depth	338 mm
Width	565 mm
Height	90 mm
Weight	2900 g