81
Virtual Patch Source List
Scope Source Notes
Display Full name Display Full name
OFF Off ---
CTRL Controller MOD WHEEL Modulation Wheel
PITCH WHEEL Pitch Wheel
PITCH WHL+ Pitch Wheel + This effect will be applied when the PITCH wheel is
moved in the + direction (away from you).
PITCH WHL− Pitch Wheel − This effect will be applied when the PITCH wheel is
moved in the − direction (towards you).
PEDAL Damper Pedal
KBD Keyboard NOTE Note Number The effect will be applied according to the note number.
The center note is 60 (C4).
VEL Velocity
EXP VEL Exp. Velocity The effect will be applied exponentially in relation to the
velocity. The effect will not be readily evident at lower
velocity values, but will be applied at a steep curve with
higher velocity values.
REL VEL Release Velocity The effect will be applied according to release velocity
(how quickly you release the key after you play a note).
EG LFO EG/LFO EG1 EG1 (Pitch)
EG2 EG2 (Filter)
EG3 EG3 (Assignable)
LFO1 LFO1 (Operator)
LFO2 LFO2 (Filter)
LFO3 LFO3
(Assignable)
CC + CC Unipolar 1..119 CC 1..119 + When the CC value is “0”, the V.Patch effect will also be “0”.
When the intensity is a positive value, increasing the CC
value will result in a positive effect only. (this works the
opposite with a negative value).
CC −/+ CC Bipolar 1..119 CC 1..119 +/− When the CC value is “64”, the V.Patch effect will be “0”.
When the intensity is a positive value, increasing the CC
value above 64 will result in a positive effect, and
reducing the value will result in a negative effect. (this
works the opposite with a negative value).
MIDI MIDI AFTER TOUCH After Touch
POLY AFTER Poly After Touch
To Next Page
Loading...
Need help?
General
Weight and Dimensions
