21
Performing with the arpeggiator
1.
Press the ARPEGGIATOR button. “Arpeggiator Run=On” will appear in the display.
2.
e pattern set in the program will be used when you play the keyboard.
(Arpeggio type: UP)
For more on the patterns, see “PTRN (Arp Pattern)” (→ p.56)
3.
When you hold down the ARPEGGIATOR button, “Arpeggiator Run=Latch” will appear in the
display and the latch function will be enabled.
e arpeggiator will keep playing, even if you take your hand o the keyboard.
Hold down the ARPEGGIATOR button once more to disable the latch function.
4.
Press the ARPEGGIATOR button once more to turn o the arpeggiator. “Arpeggiator Run=O”
will appear on the display.