Korg opsix User Manual

70
GLOBAL
is page is used to conguring the overall settings for the opsix. Use the PAGE < and > buttons or
DATA ENTRY A–D knobs to change the category. e OP −/+ buttons or the DATA ENTRY B/E
knobs change the parameter, and the DATA ENTRY C/F knobs change the value.
TUNE
Master Tune
is adjusts the overall tuning for the entire opsix in one-cent units (semitone = 100 cents), over a
range of ±50 cents.
When the value is set to 0 cents, A4 is equal to 440 Hz.
Transpose
Adjusts the overall pitch of notes you play on the keyboard in semitones, over the range of one octave
up or down. ese settings are applied at the position (Pre or Post) set using “ConvertPosition”.
MIDI
Global Channel
Species the MIDI channel. is MIDI channel will be used for transmitting and receiving note
messages, pitch bend and control change messages.

Korg opsix Specifications

General

Equalizer	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Chorus, Flanger/Digital Signal Processing (DSP), Phaser, Reverberation
Sound effects quantity	500
Keyboard number of keys	37
Maximum polyphony (notes)	32
Headphone outputs	1
DC input voltage	12 V
Power source type	AC

Weight and Dimensions

Depth	338 mm
Width	565 mm
Height	90 mm
Weight	2900 g