46
OPERATORS: LEVEL/EG
EG: OP1...6 (Operator Level/EG)
ATK (Attack Time)
Species the time from note-on until the maximum level is reached.
DECAY (Decay Time)
is sets how long it takes to settle from the peak to the Sustain level.
REL (Release Time)
is sets how long it takes the envelope to fall to 0 aer releasing a note.
LEVEL (OP Level)
Sets the output level of the Operator. is is the same parameter controlled by the OPERATOR
MIXER slider.
SUS (Sustain Level)
is sets the level at the end of the Decay time.
When the sustain level is reached, this level is maintained until note o.
CURVE
is sets the decay and release curves.