94
Restoring the opsix to factory-set default settings
You can restore the opsix’s preset programs and global settings to their original factory-set state.
Never turn o the power while data is being loaded. Doing so may corrupt the internal data.
1.
Turn o the power of the opsix.
2.
While holding down the SHIFT button and the WRITE/RECALL button, turn the opsix on.
“Factory Reset” will be shown on the display.
3.
When the message “WHAT DO YOU WANT TO RESET?” is displayed, turn the PROGRAM
knob to select the items you want to restore to factory default settings (Preset, Global or All).
If you select “ALL” and execute, all user programs that are saved on the opsix will be
erased as well.
4.
Press the OP SELECT + / YES button.
5.
Press the WRITE button.
“Resetting...” will appear on the display.
To Next Page
Loading...
