Korg opsix User Manual

72
Post:
Applies the velocity curve and transpose settings to the data just before it is fed into the
sound generator. e data that is aected by the settings (velocity curve and transpose) is the data
played with the keyboard of the opsix before it is sent to the sound generator, as well as the data
received via MIDI IN. is has no eect on MIDI data transmitted from MIDI OUT when
playing the keyboard of the opsix.
Velocity
Curve
Tone
generator
MIDI OUT
Transmitted
Transpose
Scale
opsix built-in keyboard
Velocity
Curve = 4
Note number changes
No
Transpose
Received
MIDI IN
Rx Transport
Sets whether start and stop messages (which are MIDI real-time messages) will be received.
Rx Prog Chg
Selects whether MIDI program change messages will be received.
Rx CC
Selects whether MIDI control change messages will be received.
TIP:
CC#1 (Modulation Wheel), CC#64 (Damper) and CC#120 onward cannot be controlled
using this setting.
Rx Pitch Bend
Selects whether MIDI pitch bend messages will be received.
Tx Transport
Sets whether start and stop messages (which are MIDI real-time messages) will be transmitted.
Tx Prog Chg
Selects whether MIDI program change messages will be transmitted.
Tx CC
Selects whether MIDI control change messages will be transmitted.
Tx Pitch Bend
Selects whether MIDI pitch bend messages will be transmitted.

Korg opsix Specifications

General

Equalizer	Yes
Product type	Digital synthesizer
Product color	Black
Sound effects	Chorus, Flanger/Digital Signal Processing (DSP), Phaser, Reverberation
Sound effects quantity	500
Keyboard number of keys	37
Maximum polyphony (notes)	32
Headphone outputs	1
DC input voltage	12 V
Power source type	AC

Weight and Dimensions

Depth	338 mm
Width	565 mm
Height	90 mm
Weight	2900 g