BA 348-01 * 2.0 * 34801b330.fm 3-53
Operation 3
3.32 Load stabilizer (option)
Notices on the load stabilizer function
When travelling longer distances, off-road or on public roads, the load stabilizer dampens
the movements of the loader unit and avoids pitching movements of the machine.
This increases drive comfort and safety.
Risk of accidents! When travelling on public roads, the machine may become
unstable if the load stabilizer is not switched on.
☞Always set switch 69 to position B during machine travel on public roads
If the machine is equipped with the “Hose burst valve” option, switching on
the load stabilizer automatically disables the hose burst valve.
The loader unit is no longer secured against lowering caused by possible line
damage ! –seeHose burst valve safety feature (option) on page 3-110
In order not to impair the load stabilizer function in transport position of the
loader unit, do not retract the tilt ram to the limit (pressure)!
• After setting the loader unit to transport position, tilt in the bucket as far
as it will go, then tilt it out slightly again.
• Briefly reduce the pressure on the tilt ram limit
To Next Page
Loading...
