BA 348-01 * 2.0 * 34801b340.fm 3-101
Operation 3
Specific safety instructions
• Always lock the control lever for the 3rd control circuit when working with the pallet forks
➥–seeLock for loader unit control lever and mechanical locking of 3rd control circuit
(standard) on page 3-42!
• Always follow the Load diagram for pallet forks. Never exceed maximum load!
• Follow the special instructions in the Operator’s Manual of the pallet forks!
• Approach the material as closely as possible!
• Always approach the material with the machine wheels in straight-ahead position!
• Always load on firm and level ground with sufficient load-bearing capacity only
(for a fully loaded machine)!
• Never raise a load with only one fork arm!
• Maintain a distance of a minimum 6 m between the boom/load and overhead lines!
• Before starting work, ensure that the fork arms on the fork frame are safely locked!
• Never operate the boom and the attachments at higher machine speed!
• Never leave the machine with the load raised!
• Always transport the load close to the ground!
To Next Page
Loading...
